Inventor® 2017 Sheet Metal Design (2day)


Aug 28 2017 - 08:00 - Fredericton

What Autodesk® Inventor® Sheet Metal is all about!

Inventor Sheet Metal Design introduces the techniques of modeling sheet metal using  Autodesk Inventor. The structure of the class follows the typical stages of  using Inventor to create and edit sheet metal parts. It also covers the  generation of flat patterns, and documentation of the design with drawings.  The class is industry specific but can be  applied to other environments such as cardboard box design and layout. Class  numbers are small (maximum 8 students) meaning that you have ample  opportunity to discuss your specific requirements with the Instructor and  work out any problems you are having.

 

What you need to know before. This course is designed for the Microsoft Windows user who possesses working  knowledge of Autodesk Inventor software. Although not required, knowledge of  sheet metal processing is helpful while students learn the design tools in  Inventor.

 

Interested?

  • The duration of  this training is 2days.
  • Class sign-up starts at 8:00am on the first day
  • Class hours are 8:30am to 5:00pm daily
  • 64-bit computer is supplied
  • Autodesk Training Guide (ATG) is supplied
  • Details on classroom location will be provided before start date

Pricing: $450/student/day (tax not included)

What is not included: Students are responsible for their travel, meals and living expenses.

 

Reserve your seat today! Course requires pre-registration to attend.Use the registration form at the end of this page to reserve and purchase your seat. If you prefer, you can reserve your seat or get further information by giving us a call at: (506) 459-3271 or by email us at: Michel.Beaulieu@solidcad.ca. To allow time for course setup, registrations must be received 7 days prior to course start. Seats are limited so don’t delay!NOTE: You must be registered and logged into the site and you must have selected the event (class, location and date) before the registration form will display.

COURSE OUTLINE

Inventor Sheet Metal Design, training content

Introduction to Sheet Metal Modeling

  1. Sheet Metal Concepts
  2. Sheet Metal Terminology
  3. Sheet Metal Environment
  4. Sheet Metal Design Process
Sheet Metal Base Features

  1. Applying Existing Sheet Metal Defaults
  2. Creating a Face as a Base Feature
  3. Creating a Contour Flange as a Base Feature
  4. Creating a Contour Roll as a Base Feature
Sheet Metal Secondary Features

  1. Sheet Metal Parameters
  2. Bend Relief Shapes
  3. Faces as Secondary Features
  4. Contour Flanges as Secondary Features
  5. Contour Rolls as Secondary Features
Flanges

  1. Creating Flanges
  2. Corner Relief Options
Bending Sheet Metal

  1. Hems
  2. Folds
  3. Bends
Corner Rounds and Chamfers

  1. Creating Corner Rounds
  2. Creating Corner Chamfers
Sheet Metal Cuts

  1. Creating Cut Features
  2. Creating Straight Holes
  3. Using Punch Tool Features
  4. Creating a Punch Tool
  5. Cuts Using Surfaces
Corner Seams

  1. Creating Corner Seams and Miters
  2. Creating Corner Rips
  3. Converting Corner Seams and Bends
 Flat Pattern Environment

  1. Creating Flat Patterns
  2. Orienting Flat Patterns
  3. Punch Representations
  4. Bend Angle
  5. Flat Pattern Cleanup
  6. Exporting to DXF/DWG
 Lofted Flange and Rips

  1. Lofted Flange
  2. Rip
 Unfold and Refold

  1. Unfold and Refold
 Documentation and Annotation

  1. Sheet Metal Drawing Terminology
  2. Creating Sheet Metal Drawings
  3. Bend & Punch Notes
  4. Bend Tables
  5. Punch Tables
  6. Bend Order
  7. Cosmetic Centerlines
 Converting Parts to Sheet Metal

  1. Converting Solid Model to Sheet Metal
  2. Non-Rules Surfaces
 Sheet Metal Rules

  1. Working with Sheet Metal Rules
  2. Sheet, Bend and Corner Tab Options
  3. Bend Tables
 Additional  Exercises

 

NOTE: You must be registered and logged into the site and you must have selected the event (class, location and date) before the registration form will display.